Arnold C. Seismic issues in architectural design. In: Arnold C, Bolt B, Dreger D, Elsesser E, Elsesser R, Holmes W, et al. Risk management series: Designing for earthquakes -a manual for architects. Washington D.C.: FEMA; 2006.
Celep Z, Erken A, Taskin B, Ilki A. Failures of masonry and concrete buildings during the March 8, 2010 Kovanclar and Palu (Elazıg) Earthquakes in Turkey. Eng Fail Anal. 2011;18(3):868-89.
Mehdizadeh Saradj F. Seismic issues in the design process the role of architect in seismic safety issues in the design process. Int J Archit Urban Plan. 2008;19(6):9-20.
Mousavi H. Vulnerability Reduction in Architectural Design with Performance Based Seismic Design Approach. Hoviatshahr. 2010;4(7):53-60.
Filiatrault A, Sullivan T. Performance-based seismic design of nonstructural building components: The next frontier of earthquake engineering. Earthq Eng Eng Vib. 2014;13(1):17-46.
Inan T, Korkmaz K. Evaluation of structural irregularities based on architectural design considerations in Turkey. Struc Surv. 2011;29(4):303-19.
Toker S, Ünay AI. Re-characterization of architectural style of reinforced concrete building facades by exterior seismic strengthening. Build Environ. 2006;41(12):1952-60.
Özmen C, Ünay AI. Commonly encountered seismic design faults due to the architectural design of residential buildings in Turkey. Build Environ. 2007;42(3):1406-16.
Mousavi K. The role of training seismic design in architecture on reducing vulnerability of buildings against earthquakes. Honar-sou. 2011;1(1):80-93. [Persian]
Noorifard A, Farzian M. Stable architecture against earthquake: Design of a middle school in Tehran. Honar-Ha-Ye-Ziba. 2009;36:37-48. [Persian]
Gallipoli MR, Mucciarelli M, Šket-Motnikar B, Zupanćić P, Gosar A, Prevolnik S, et al. Empirical estimates of dynamic parameters on a large set of European buildings. Bull Earthq Eng. 2010;8(3):593-607.
Mahin Roosta R, Naghiloo R. Modeling the effect of embankment dam construction on the liquefaction potential of alluviual foundation. Civ Eng Sharif. 2013;28-2(4):53-64. [Persian]
Moa Abasi H, Jamshidi Chenari R. Evaluation of liquefaction potential in mazandaran province using in-situ test data with review of ishihara criterion. Civ Engin Sharif. 2013;28-2(4):127-35. [Persian]
Asgari F, Kasaei M. An evaluation on liquefaction potential of a part of South-East of Tehran City. J Coll Eng. 2003;37(2):257-68.
Noorifard A, Tabeshpour MR, Saradj F. M. Preventing irregularity effects of infills through modifying architectural drawings. Architecture Civil Engineering Environment. 2016; 9(2):77-92.
Sezen H, Whittaker AS, Elwood KJ, Mosalam KM. Performance of reinforced concrete buildings during the August 17, 1999 Kocaeli, Turkey earthquake, and seismic design and construction practise in Turkey. Eng Struct. 2003;25(1):103-14.
Arslan MH, Korkmaz HH. What is to be learned from damage and failure of reinforced concrete structures during recent earthquakes in Turkey?. Eng Fail Anal. 2007;14(1):1-22.
Alaluf R, Hernandez R, Dönmez C, İrfanoğlu A. Learning from earthquakes, The Mw 7.1 Erciş-Van, Turkey earthquake of october 23, 2011 [Internet]. Okland: Earthquake Engineering Research Institute; 2012.[cited 2012 December 20]. Available from: https://dokument.tips/documents/van-turkey-eq-report.html.
Mahdavinejad MJ, Bemanian M, Abolvardi Gh, Elhamian SMM. Analyzing the state of seismic consideration of architectural non-structural components (ANSCs) in design process (based on IBC). Int Disaster Resil Built Environ. 2012;3(2):133-47.
Jabbarzadeh MJ, Motamedi M, Alami F, Hatami M. Assessing the damage of steel structures in 22nd of June 2002 earthquake occurred in Changureh. Res Bull Seismol Earthq Eng, 5th Year. 2002;5(1):33-40. [Persian]
Noorifard A, Saradj FM, Tabeshpour MR. Preventing undesirable seismic behaviour of infill walls in design process. Urban Archit Constr. 2017;8(1):57-80.
Sanada Y, Konishi D, Swezinwin M. Effects of nonstructural brick infills on an indonesian earthquake-damaged building. Proc Eng. 2011;14:2077-85.
Klingner RE. Behavior of masonry in the Northridge (US) and Tecoma´n–Colima (Mexico) earthquakes: Lessons learned, and changes in US design provisions. Constr Build Mater. 2006;20(4):209-19.
Hosseini M. On the nonstructural elements and their behavior in the Bam, Iran earthquake of december 26, 2003. J Seismol Earthq Eng. 2004;5(4):169-96.
Eshghi S, Zare M, Naser Asadi K, Seyed Razaghi, Noorali Ahari, Motamedi M. Preliminary report of Bam earthquake (26 December 2003) [Internet] Tehran; International Institute of Earthquake Engineering and Seismology; 2003 [cited 2012 November 10]. Available from: https://goo.gl/jmHqpj. [Persian]
Building and Housing Research Center. Bam and its earthquake teach us. Tehran: Buil Hous Res Cent; 2002. [Persian]
Feng Y, Wu X, Xiong Y, Li C, Yang W. Seismic performance analysis and design suggestion for frame buildings with cast-in-place staircases. Earthq Eng Eng Vib. 2013 Jun 1;12(2):209-19.
Dowrick, DJ. Earthquake resistant design for engineers and architects. 2nd Edition. New York: Wiley; 1987.
Iran Standard and Quality Inspection Co. Reactions of steel structures against earthquakes, inspection of steel structures with a view to international standards and evaluation of Bam earthquake. Tehran: Sabzan Press; 2005. [Persian]
Dogangün A. Performance of reinforced concrete buildings during the May 1, 2003 Bingöl Earthquake in Turkey. Eng Struc. 2004;26(6):841-56.
Danesh F. Seismic performance evaluation of buildings in 17nd of August 1999 Izmit, Turkey Earthquake. Res Bull Seismol Earthq Eng. 1999;(4):43-33. [Persian]
Hosseini Hashemi B. Assessing the Behavior of Reinforced Concrete Elements and Fittings in 17nd of August 1999 Izmit, Turkey Earthquake. Research Bulletin of Seismology and Earthquake Engineering, 1999;(4):44-61. [Persian]
Wallace J. Learning from earthquakes performance of engineered structures in the Mw 9.0 Tohoku, Japan earthquake of march 11, 2011. EERI Special Earthquake Report. 2012 Jan.